Large Capacity Sand Gravel Separation Screw Classifier Processing Plant

Product Description

Product Description

When the screw screen washing machine is in operation, the processed materials are first put into the sand washing device of the roller, After screening in the roller device, the qualified materials in the two kinds of materials with different particle sizes are directly transported through the conveyor belt, and the materials under the screen enter the middle water tank. After being cleaned and screened by the screw blade, the qualified materials enter the back end. Dehydration is performed in the dehydration plant.
 

The overflow part of the wastewater in the tank (including a small amount of qualified material wastewater and impurities which have not been picked up by the spiral blade) enters the back-end pumping tank, and is pumped into the separation and recovery device by the high-pressure water pump, and the qualified material is sent to the dewatering device for dewatering treatment after centrifugal concentration. The waste water and impurities are discharged into the return water tank after separation and recovery device.

The length of liquid level is short, so its surface can directly gets the stirring effect by the spiral blade, therefore it suitable for coarse particle classification, usually the classified particle size is over 0.15mm. The spiral blade of submersion classifier at lower end completely submerged under the liquid level, the classifying area is big and smooth, suitable for classification for fine particle which is less than 0.15mm, its overflow productivity is higher.

Model	Spiral diameter (mm)	Overflow (m3)	Sand return (m3)	Power (Kw) Driving motor, Lifting motor	Dimension (mm)
FLG-5	500	32	143-261	1.1, 0	4500*555
FLG-7	750	65	256-564	3, 0	5500*830
FLG-10	1000	85	473-1026	5.5, 0	6500*1112
FLG-12	1200	155	1170-1600	5.5, 1.5	6500*1372
FLG-15	1500	235	1140-2740	7.5, 2.2	8265*1664
FLG-20	2000	400	3890-5940	11/15, 3.0	8400*2200
FLG-24	2400	580	6800	15, 3.0	9130*2600
2FLG-12	1200	310	2340-3200	5.5×2, 1.5×2	6500*2600
2FLG-15	1500	470	2280-5480	7.2×2, 2.2×2	8250*3200
2FLG-20	2000	800	7780-11880	11×2 , 3×2	8400*4280
2FLG-24	2400	1160	13600	30, 3×2	9130*5100

 

Main Product

Company Profile

Zhiyan Future Machinery Equipment (Xiamen) Co., Ltd. was established in XiamenCity, Fujian Province. The companyadheres to the values of *inteligent innovationand Precision Engineering, Jointly Expanding Green Energy, empoweringthe sustain.able development of the global mining industry with technology, and helping tobuild a new ecosystem foreffcient resource utilization, We offer comprehensive ser.vices including project design, process optimization, andcustomized production ofboth standard and non-standard equipment.

Certifications

 

Packaging & Shipping

 

FAQ

Q1: What types of ores is your equipment suitable for?
A1: The mineral processing eauipment we provide is suitable for various ores, including but not limited to: metalicores, non-metallic ores, rare ores, etc. The process flow can be customized according to the characteristics ofthe ore (hardness, particle size,composition, etc.).

Q2: How to choose the right mineral processing equipment?
A2: When selecting equipment, the following factors should be comprehensively considered: the nature of theore; Capacity demand Site conditions Environmental protection requirements, We ofer free technical consulta-tion and can send engineers to the site for inspection to recommend the best solution.

Q3: How about the energy consumption and effciency of the equipment?
A3: Our equipment adopts an energy-saving design. Compared with traditional equipment, it can reduce energyconsumption by 10% to 30%, and improve processing effciency by optimizing the structure. The specifc dataneed to be evaluated based on the process confguration.

Q4: Can you provide renovation and upgrading services for the existing production lines?
A4: Sure! We offer, partial equipment replacement for old production lines; Automated transformation Environ-mental protection upgrade and other services.

Q5: How is after-sales support guaranteed?
A5: Warranty period: 1-2 years for core equipment (subject to the contract specifcally);Spare parts supply: Always keep a stock of vulnerable parts and deliver them within 48 hours in case of emer-gency.Technical services: Remote guidance + on-site support to ensure prompt problem-solving.

Q6: How long is the equipment delivery and installation cycle?
A6: $tandard equipment is in stock and will be dispatched within 15 days. The production cycle for customizedequipment is approximately 1 to 3 months (depending on complexity).linstallation and commissioning are carriedout by a professional team and usually take 1 to 4 weeks.

You can submit your requirements via email, phone or online